Sim2 HT300 E-Link User Manual download pdf (Page 18)



Fig. 18a

Fig. 18b

8 ON SCREEN MENU

INPUTS

The input selection menu (Inputs) is called by pressing 0 on the

remote control and, when no other menu is displayed, using the

· and ‚ keys on the keypad. To select an input, scroll the list

with the

· and ‚ keys until the desired input is highlighted, then

press

‡. Display of the input selection menu is terminated

by pressing the ESC key, or when the time allowed for displaying

the on-screen menu has lapsed (set in the Set-up Menu).

Input 5 can accept RGB and YCrCb signals with a scan fre-

quency up to 32Khz.

Inputs 6, 7 and 8 can receive RGB and YCrCb signals, at 15

kHz, 32 kHz or higher. The association between the input and

the type of signal is made from the pull-down menu that appears

on the right of the < symbol after pressing the

ﬂ key (Fig. 18b).

In the pull-down menu it is also possible to choose the hori-

zontal frequency or use the AutoSync feature;in this case the

system detect the horizontal frequency signal (15KHz,32KHz

or higher) automatically.

Inputs

1 VIDEO 1

2 VIDEO

3 S-VIDEO

4 S-VIDEO

5 COMP/RGB

6 COMP/RGB

7 COMP/RGB 7

8 COMP/RGB 8

9 GRAPH RGB 9

10 GRAPH RGB 10

DVI-D 11

12 HDMI 12

5 YCrCb 32kHz

6 RGBS 15kHz

7 YCrCb

8 YCrCb 15kHz

11 YCrCb

Inputs

5 YCrCb 32kHz

6 RGBS 15kHz

7 YCrCb

8 YCrCb 15kHz

11 YCrCb

YCrCb AutoSync

YCrCb 15KHz

YCrCb

RGB AutoSync

RGB 15KHz

RGB

1 VIDEO 1

2 VIDEO

3 S-VIDEO

4 S-VIDEO

5 COMP/RGB

6 COMP/RGB

7 COMP/RGB 7

8 COMP/RGB 8

9 GRAPH RGB 9

10 GRAPH RGB 10

DVI-D 11

12 HDMI 12

All system functions can be activated from the keypad or remote control with the aid of a practical and comprehensive system

of on screen menus.

Input 11 is capable of receiving YCrCb or RGB signals coming

from DVI-D sources.

The selection should be made from the drop menu following

the indications described above.

After selecting the source signal (by means of the

· and ‚

keys), press MENU+/MENU - to conﬁrm and close the pull-down

menu; the value you have just set will be displayed on the right

of the < symbol.

As with the other inputs, you can now select the input just set

by pressing the ‡ key.

During the short time it takes to ﬁnd the signal, a box appears

showing the signal requested. As soon as the signal is shown

in the box additional information is displayed concerning the

video standard (for video signals) or resolution (for graphic

signals), and format.

Fom the SETUP menu it is possible to choose to visualize or not

this information, for more details check the

“SOURCE INFORMATION”

“MENU”

section.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Comments to this Manuals

No comments

Sim2 HT300 E-Link User Manual Page 18

Comments to this Manuals

Related products and manuals for Projectors Sim2 HT300 E-Link