Sim2 Domino 45 User Manual download pdf (Page 62)

4.5 SELECTING THE

AUDIO-VIDEO SOURCE

After you have connected all your audio-video appliances to the

television using the correct cables, you must use the OSD to select

the connectors to which each appliance is connected before you

can display the signals from them on the screen. A convenient con-

nections menu is provided to select the audio-video appliance you

want to view. This menu is displayed by pressing the AV key [10].

Proceed as follows.

Press the AV key [10] to display the list of connectors and select the

code of the connector for the appliance you wish to view.

The menu displays the following options:

Now let us look in detail at how to select the right connectors for

the audio-video inputs to the television.

• Select “TV”

to display the input to the radio frequency ANTENNA

CONNECTOR [B].

NOTE: If you wish to connect a video recorder to this connector,

you must tune in and memorise its audio-video signal before you

can see the picture from it on the screen. See section 4.6.2 Tuning

in and programming channels manually. If you connect a video

recorder to the antenna socket, set number “0” as the “Prog.

Number” parameter and number “36” (or whatever number is speci-

fied in your video recorder’s user manual) as the “Channel” parame-

ter in the programme list.

• Select “A

V-1” to display the input to the SCART 1 connector [C].

NOTE: This connector is also able to receive an RGB video signal. If

the appliance connected to it delivers an RGB video signal, select

the next option “AV-1 RGB” instead.

• Select “A

V-2” to display the input to the SCART 2 connector [D].

• Select “A

V-3” to display the signal from the CINCH VIDEO CON-

NECTORS [F], to which you have connected a cable with an RCA

connector, and from the associated L/R AUDIO [L and I] connectors.

• Select “A

V-3 Y/C”

to display the signal from the CONNECTOR

[E], to which you have connected a cable with a mini-DIN type con-

nector, and from the associated AUDIO L/R [L and I] connectors.

TV Connections

TV (RF)

AV-1 (SC1)

AV-1 RGB (SC1)

AV-2 (SC2) OK-

AV-3 (CVBS)

AV3 YC (SVHS)

AV DVD (YCrCb)

Graphic Mode 

• Select “AV DVD” to display the signal from the three CONNEC-

TORS [G] and from the associated L/R AUDIO [L and I] connectors.

• By selecting "Graphic Mode"

you access (key [23]) the sub-

menu TV connections with the following three items:

- “VGA”. Select this item to display the video signal from the GRA-

PHIC INPUT [H] connector and the audio signal from the associa-

ted AUDIO L/R [L and I] connectors.

- “RGB-32”. Select this item to display the video signal from the AV

GRAPHIC RGB [G and S] cinch connectors and the audio signal

from the associated AUDIO L/R [L and I] connectors.

- “DVD-32”. Select this item to display the video signal from the

three cinch connectors AV GRAPHIC RGB [G] and the audio

signal from the associated AUDIO L/R [L and I] connectors.

NOTE: Once the above three selections have been made, your tele-

vision will be in the “GRAPHIC MONITOR” mode (see Chapter 5

FUNCTIONING - GRAPHIC MONITOR MODE).

IMPORTANT: For each single item in the TV Connections menu

and sub-menu, image stability can be improved, recalling the Other

Functions menu (blue key [3]) and setting one of three available

options in “VCR Filter”, whichever you prefer (“VCR 0”, “VCR 1”,

“VCR 2”). This setting is stored and coupled to the external video

signal (the one you have chosen and which you will see as the first

item at the top in the Other Functions menu). The option you have

set in “VCR Filter” is recalled automatically each time you display

this external video signal.

The PHONES connector [A], HI-FI connectors [M and N] and SUB-

WOOFER connector [P] only provide audio outputs. To adjust the

signal to these connectors, see section 4.7.3 Sound menu adjust-

ments.

4.5.1 Connecting an input to an output

You can use the television as a ‘bridge’ to transfer an audio-video

signal ENTERING the television through one of the three connectors

listed below directly to the Scart 2 connector [D] (labelled AV-2) to

LEAVE the television and go to whatever appliance is connected to

it. Proceed as follows to establish the ‘bridge’ between the two con-

nectors.

-01- Press the AV key [10] to display the connections menu and

select the code for the connector to which the source appliance is

connected.

-02- Press the blue key [3] to display the Other Functions

menu. Select the option “AV-2 Output” and then select one of the

three following options:

- “TV” if the signal originates from the ANTENNA CONNECTOR [B].

- “AV-1” if the signal originates from the SCART 1 CONNECTOR [C].

- “AV-3” if the signal originates from the CINCH VIDEO CONNEC-

TOR [F].

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 79 80

Comments to this Manuals

No comments

Sim2 Domino 45 User Manual Page 62

Comments to this Manuals

Related products and manuals for Projectors Sim2 Domino 45